SEAT manuals PDF
SEAT Alhambra 2000 Engine repair (ANU, ASZ, AUY, BTB, BVK, BRT)
Tolerances oil for VW | Audi | Seat | Skoda (VAG)
Tolerances car manufacturers should be listed on the label of the engine oil after the information on the viscosity and the assignment of quality grade API and ACEA. If your desired tolerance is not listed, then it's definitely oil has no such admission.
Important !!! Here granted only a brief description of the tolerances of the engine oil VAG! To accurately determine the tolerance of the particular engine, refer to the documentation for the car or an authorized representative of the VAG.
VW 500.00 Energy saving, all-season avtomasla SAE 5W-30, 5W-40, 20W-30 or 10W-40 is designed for use in gasoline engines. Baseline characteristics meet the requirements of ACEA A3-96.
VW 501.01, universal avtomasla for use in gasoline and diesel engines with direct injection. Baseline characteristics meet the requirements of ACEA A2 class.
Notes: must be made to check the compatibility with elastomeric gaskets, using a turbodiesel engine - only in conjunction with - VW 505.00;
VW 502.00, motor oil for gasoline engines with direct injection, as well as an increased effective capacity. Baseline characteristics meet the requirements of ACEA A3 grade;
VW 503.00, the new standard for gasoline engines with extended service intervals (WIV: 30 000 km, 2 years, Longlife). Exceeds 502 00 (HTHS 2,9 MPa / s). The oil is only for engines that were issued May 1999
Note: not allowed to apply for the car's previous releases due to low temperature viscosity, which can damage the engine.
VW 503.01, avtomasla for loaded gasoline engines with extended service intervals (Longlife), for example, the Audi S3, TT (HTHS> 3,5 MPa / s).
VW 504.00, avtomasla for petrol and diesel engines with extended service interval Longlife, including diesel engines with particle filters without additional additives in the fuel.
VW 505.00, avtomasla for diesel engines of passenger cars with or without turbo. Baseline characteristics meet the requirements of the class ACEA B3.
Note should be checked for compatibility with elastomeric seals;
VW 505.01, avtomasla with a viscosity of SAE 5W-40 for diesel engines with pump - injector (Pumpe - Demse);
VW 506.00, avtomasla for passenger cars with turbo diesel with extended service intervals Longlife; Baseline characteristics meet the requirements of the class ACEA B4.
Notes: only intended for engines manufactured between May 1999 .; forbidden to apply for a car's previous editions of the low temperature viscosity, which can lead to engine damage.
VW 506.01 oil for diesel engines with pump -forsunkoy with extended service intervals Longlife. Baseline characteristics meet the requirements of ACEA B4.
VW 507.00 avtomasla for petrol and diesel engines with extended service intervals Longlife, including diesel engines with particle filters without additional additives in the fuel. Alternatively - 505.00 or 505.01